设为首页 | 加入收藏 | 论坛
您当前位置: 同威贸易(香港)有限公司 >> 产品中心 >> 日本歌乐 >> 功放/功率放大器系列 >> 浏览商品
2014-2015新款産品
專車專用導航一體機
HX旗舰级産品系列
多媒體産品系列
主機産品系列
功放（放大器）産品
喇叭/揚聲器産品
超低音産品系列
配件産品
XC1120
XC1420
XC6410
XC6210
XR2120

XC1120
规格: 350 W 单声道功率放大器
产地:
 
  • MK4
  • IS 12
  • REF 12
  • 商品介绍
  • 实拍图片
  • 产品评测
XC1120_01
  • 350 Watts of Maximum Power Output
  • 300 Watts × 1 Continuous @ 2-Ohms
  • 210 Watts × 1 Continuous @ 4-Ohms
  • Double Side Conformally Coated PC Board
  • MOS-FET Power Supply
  • Selectable Low Pass Crossover : 60Hz, 90Hz, 250Hz
  • Selectable Bass Boos Control : 12dB at 45Hz
  • Variable Gain Control
  • Turn-On/Off Muting Circuitry (Soft Mute)
  • Ground Loop Isolation Input Circuit
  • Corrosion Resistant Nickel Plated RCA, Power, and Speaker Connections
  • RCA and High Level Speaker Inputs
Circuit design achieves high quality sound
Clarion amplifiers feature uncompromising resistance to magnetic noise, thereby minimizing distortion, as well as high quality block terminals to offer low electrical and contact resistance. Easy subwoofer system configuration is possible with the embedded high pass and low pass filters. The result is high quality sound you can enjoy in a variety of systems.
Corrosion resistant RCA and block terminals on all XC series amplifiers
By utilizing corrosion resistant RCA and Connectors, XC series amplifiers offer improved durability and reliability in harsh environments. The XC series amplifiers are true marine amplifiers with efficient aluminum heatsinks and locking power terminals for the harsh marine conditions.
XC1120_hi_02
MOS-FET power amp
There’ s only one way for Clarion’ s main units to deliver unyielding power output and linearity: MOS-FET amplification, or Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, a MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. This means you can crank up the volume or set it to easy listening. Either way, your sound will be crystal clear.
2-Ohm stability
Utilizing this design for peak performance and unwavering reliability, Clarion’s amplifiers can drive lower impedance loads for increased power.
XC1120_hi_03
CEA 2006 power ratings
 
350W × 1 RMS [2Ω @ ≤ 14.4V 1% THD+N]
210W × 1 RMS [4Ω @ ≤ 14.4V 1% THD+N]
S/N ≧ 70dB (ref: 1W into 4Ω)
版權所有：同威貿易（香港）有限公司